SAMSUNG SM-900I UNLOCKING BY BST DONGOL
Today i successfully unlocked SAMSUNG SM-G900i by BST. Thanks to the best team.
Steps i did :
1. Turn usb debugging ON, *#0808# select AP and DM+modem+adb,and reboot the phone.
2. Connect the phone by usb cable and scan.
3. Select 'usb modem' in 'unlock' tab then shift to 'service' tab
4. In 'service' tab select 'write default efs' (phone will turn on download mode and will write default efs and will reboot itself. After reboot if u see the imie it will be ' 01/' - don`t panic)
5. Go to 'unlock' tab select 'com port' then shift to 'service' tab.
6. Connect pcb adapter(i used my z3x box as pcb adaptor coz my pcb adaptor have some problem) and connect UART R523K - both ends to the box and the other to the phone.
7. Do scan again.
8. In 'super imie' option select 'Default' and select a imei as u desire.
9. Now select ' restore imie'. And u will see a dialog screen and select your com port ( i select z3x box com port so i used z3x box as pcb adaptor) - u r almost done.
10. Now u will see the super imei u selected after reboot the phone.
11. Finally connect the phone by usb cable and scan. Then select ' repair network'. - DONE.
12. Reboot. Insert sim card and wait 2,3 min for signal.
----------- ENJOY. -----------
Steps i did :
1. Turn usb debugging ON, *#0808# select AP and DM+modem+adb,and reboot the phone.
2. Connect the phone by usb cable and scan.
3. Select 'usb modem' in 'unlock' tab then shift to 'service' tab
4. In 'service' tab select 'write default efs' (phone will turn on download mode and will write default efs and will reboot itself. After reboot if u see the imie it will be ' 01/' - don`t panic)
5. Go to 'unlock' tab select 'com port' then shift to 'service' tab.
6. Connect pcb adapter(i used my z3x box as pcb adaptor coz my pcb adaptor have some problem) and connect UART R523K - both ends to the box and the other to the phone.
7. Do scan again.
8. In 'super imie' option select 'Default' and select a imei as u desire.
9. Now select ' restore imie'. And u will see a dialog screen and select your com port ( i select z3x box com port so i used z3x box as pcb adaptor) - u r almost done.
10. Now u will see the super imei u selected after reboot the phone.
11. Finally connect the phone by usb cable and scan. Then select ' repair network'. - DONE.
12. Reboot. Insert sim card and wait 2,3 min for signal.
----------- ENJOY. -----------
Here the image is:-
Here the log is:-
Fw.Ver : BstKey V3.33
Serial : *********
Active User: gsm_raj
PL2303 : 3.8.3.0 2016-10-06
Best Smart Tools, Load OK.
Download: Press Vol Dn + Home + Power
UART Cable Resistor: 523 K
ReadCodes/Unlock/Repair:
1. Type *#0808# and set USB to AP.
2. Set "USB Settings" to "DM+MODEM+ADB".
3. Click "OK".
Cables: MicroUSB
Interface: Auto, Change UART when request
Read Info/Flashing/UserLock/Backup:
Cables: MicroUSB
Interface: Auto
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: SM-G900I
Hardware: QCOM
Mode: normal
Checking environment ...
System Info
Display ID: KOT49H
System Ver: 4.4.2 REL
API Level: 19
Incremental: G900IDVU1ANE1
Model: SM-G900I
Brand: samsung
Device: klte
Platform: msm8974
Language: en
Rigion: GB
Device Info
SerialNumber: 23b1240e
Hardware: qcom
Model: klte
PDA Version: G900IDVU1ANE1
Phone Version: G900IDVU1ANE1
Bootloader ver: G900IDVU1ANE1
Ril HW ID:
Sales Code: XSA
Model ID:
Get Bluetooth info failed
Get WI-FI info failed
Root Access: No root
Device Info (UART)
Model: SM-G900I
SW Version: G900IDVU1ANE1
Customer Code: XSA
Unique Number: C160823B1240E51
Flash Memory: -
Chipset : true
Key ID : 0478
Time used : 1.3 s
Connect to device ...
Device Authentication ...
Writing IMEI ...
Writing IMEI certificate ... ok, You need reboot device
Repair network
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: SM-G900I
Hardware: QCOM
Mode: normal
Repair network … done
Must know:-
Imei change is illegal so always use your owner imei beware.
Thanks bst team keep it up.
No comments